Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
HTGR Design Group, HTGR Project Management Office
JAEA-Technology 2023-019, 39 Pages, 2024/01
JAEA-Technology-2023-019.pdf:1.34MB
In order to realize the development of the demonstration reactor of High Temperature Gas-cooled Reactor (HTGR) with a target of starting operation in the 2030s, as indicated in the "Basic Policy for GX Realization" (Cabinet Decision on February 10, 2023) and the Working Group on Innovative Reactors of METI, Japan Atomic Energy Agency (JAEA) has been working on the development of a standard for the development of a HTGR under the Atomic Energy Society of Japan and the Japan Society of Mechanical Engineers. In addition, JAEA has been commissioned by the Agency for Natural Resources and Energy of the Ministry of Economy, Trade and Industry (METI) to conduct the "Demonstration Project for Mass Hydrogen Production Technology Using Ultra-High Temperatures" and has been promoting a hydrogen production project using the HTTR (High Temperature Engineering Test Reactor). Furthermore, in collaboration with the National Nuclear Laboratory (NNL) of the United Kingdom and the National Centre for Nuclear Research (NCBJ) of Poland, JAEA are aiming to strengthen the international competitiveness of HTGR technology by further upgrading the HTGR technology developed in Japan through the construction and operation of the HTTR. In response to the growing interest in HTGR development in Japan and abroad, we have developed FAQs on HTGR related technologies in order to provide accurate technical information on HTGRs.
O
determined by aerodynamic levitationSun, Y.*; Takatani, Tomoya*; Muta, Hiroaki*; Fujieda, Shun*; Kondo, Toshiki; Kikuchi, Shin; Kargl, F.*; Oishi, Yuji*
International Journal of Thermophysics, 45(1), p.11_1 - 11_19, 2024/01
Times Cited Count：0 Percentile：0.07(Thermodynamics)no abstracts in English
Yamada, Ippei; Chimura, Motoki; Kamiya, Junichiro; Kinsho, Michikazu
Journal of Physics; Conference Series, 2687, p.072018_1 - 072018_6, 2024/01
no abstracts in English
Takamatsu, Kuniyoshi
Kakushinteki Reikyaku Gijutsu; Mekanizumu Kara Soshi, Shisutemu Kaihatsu Made, p.179 - 183, 2024/01
The HTGR has excellent safety, and even in the event of an accident where the reactor coolant is lost, the decay heat and residual heat in the core can be dissipated from the outer surface of the RPV, so the fuel temperature never exceeds the limit value, and the core stabilizes. On the other hand, regarding the cooling system that transports the heat emitted from the RPV to the final heat sink, an active cooling system using forced circulation of water by a pump, etc., and a passive cooling system using natural circulation of the atmosphere have been proposed. However, there is a problem that the cooling performance is affected by the operation of dynamic equipment and weather conditions. This paper presents an overview of a new cooling system concept using radiative cooling, which has been proposed to solve the above problem, and introduces the results of analysis and experiments aimed at confirming the feasibility of this concept.
Fukaya, Yuji; Goto, Minoru; Shibata, Taiju
IAEA-TECDOC-2040, p.133 - 136, 2023/12
Japan has developed back-end technologies to establish a multi-recycling fuel cycle with fast breeder reactors (FBRs) to ensure energy resources. Even though the development of FBR has been retreated to one of fundamental research, the reprocessing technologies for uranium fuel and disposal technologies had been completed for Light Water Reactor (LWR) fuel cycle on the process. These technologies were inherited to utilities and are about to be practical. Now, Japan had been completed High Temperature Engineering Test Reactor (HTTR) a prototype and research reactor, a commercial High Temperature Gas-cooled Reactor (HTGR) design Gas Turbine High Temperature Reactor 300 (GTHTR300) with related reprocessing technologies, and is planning domestic demonstration reactor project. In this context, a representative fuel cycle policy is reprocessing in Japan. However, Japan has investigated various fuel cycle scenarios to expand the usage of the commercial HTGR. Then, we would like to introduce the scenarios and development status of related technologies in the present study.
Ishii, Katsunori; Morita, Keisuke; Noguchi, Hiroki; Aoki, Takeshi; Mizuta, Naoki; Hasegawa, Takeshi; Nagatsuka, Kentaro; Nomoto, Yasunobu; Shimizu, Atsushi; Iigaki, Kazuhiko; et al.
Dai-27-Kai Doryoku, Enerugi Gijutsu Shimpojiumu Koen Rombunshu (Internet), 4 Pages, 2023/09
Kubo, Shinji
Nihon Enerugi Gakkai Kikan-Shi Enerumikusu, 102(4), p.428 - 438, 2023/07
no abstracts in English
Fukaya, Yuji; Maruyama, Takahiro; Goto, Minoru; Ohashi, Hirofumi; Higuchi, Hideaki
JAEA-Research 2023-002, 19 Pages, 2023/06
JAEA-Research-2023-002.pdf:1.48MB
A study on disposal of waste derived from commercial High Temperature Gas-cooled Reactor ("HTGR") has been performed. Because of significant difference between the reprocessing of Light Water Reactor ("LWR") and that of HTGR due to difference in structures of the fuel, adoptability of the laws relating to reprocessing waste disposal, which is enacted for LWR, to HTGR waste should be confirmed. Then, we compared the technologies and waste of reprocessing and evaluated radioactivity concentration in graphite waste by activation and contamination based on whole core burn-up calculation. As a result, it was found that SiC residue waste should be disposed of into a geological repository as 2nd class designated radioactive waste in the Designated Radioactive Waste Final Disposal Act (Act No.117 of 2000), by way of amendment of the applicable order, same as hull and end-piece of LWR, and graphite waste should be shallowly disposed of than geological disposal as 2nd class waste for pit disposal in the Act on the Regulation of Nuclear Source Material, Nuclear Fuel Material and Reactors (Act No.166 of 1957) same as a channel box of LWR.
Kubo, Shinji
Suiso Enerugi Shisutemu, 48(2), p.126 - 132, 2023/06
no abstracts in English
Aoki, Takeshi; Shimizu, Atsushi; Noguchi, Hiroki; Kurahayashi, Kaoru; Yasuda, Takanori; Nomoto, Yasunobu; Iigaki, Kazuhiko; Sato, Hiroyuki; Sakaba, Nariaki
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 9 Pages, 2023/05
The safety design philosophy is developed for the HTTR (High Temperature Engineering Test Reactor) heat application test facility connecting high temperature gas-cooled reactor (HTGR) and the hydrogen production plant. The philosophy was proposed to apply proven conventional chemical plant standards to the hydrogen production facility for ensuring public safety against anticipated disasters caused by high pressure and combustible gases. The present study also proposed the safety design philosophy to meet specific safety requirements identified to the nuclear facilities with coupling to the hydrogen production facility such as measures to ensure a capability of normal operation of the nuclear facility against a fire and/or explosion of leaked combustible material, and fluctuation of amount of heat removal occurred in the hydrogen production plant. The safety design philosophy will be utilized to establish its basic and detailed designs of the HTTR-heat application test facility.
Banno, Masaki*; Funatani, Shumpei*; Takamatsu, Kuniyoshi
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 7 Pages, 2023/05
A fundamental study on the safety of a passive cooling system for the RPV with radiative cooling is conducted. The object of this study is to demonstrate that passive RPV cooling system with radiative cooling is extremely safe and reliable even in the event of natural disasters. Therefore, an experimental apparatus, which is about 1/20 scale of the actual cooling system, was fabricated with several stainless steel containers. The surface of the heating element in the experimental apparatus simulates the surface of the RPV, and the heating element generates natural convection and radiation. A comparison of the Grashof number between the actual cooling system and the experimental apparatus confirmed that both were turbulent, and the experimental results as a scale model are valuable. Moreover, the experimental results confirmed that the heat generated from the surface of the RPV during the rated operation can be removed.
Kabumoto, Hiroshi; Nakagawa, Sohei; Matsuda, Makoto
JAEA-Conf 2022-002, 146 Pages, 2023/03
"The 34th Meeting for Tandem Accelerators and their Associated Technologies" was held on July 21-22, 2022 organized by Nuclear Science Research Institute of the Japan Atomic Energy Agency. This meeting was held only on-line for preventing the spread of COVID-19 infection. The purpose of this meeting is contribution of development for related technology and of management of facilities through exchange of information among the researchers and engineers using and operating electrostatics accelerator facilities like tandem accelerators. There were 25 presentations which contains current status report of facility, technical development of accelerator, research of application. The total number of participants was a hundred, from 26 universities, research organizations and industries. This meeting consisted of only oral session, a poster session was not carried out because of on-line meeting. This proceeding compiles the contents of report papers in the meeting.
Uesawa, Shinichiro; Shibata, Mitsuhiko; Yoshida, Hiroyuki
Konsoryu, 37(1), p.55 - 64, 2023/03
In decommissioning Fukushima Daiichi Nuclear Power Station, the issue is confinement of radioactive aerosols in the primary containment vessel. Although a High Efficiency Particulate Air (HEPA) filter is used to collect the aerosol particles, pretreatment equipment such as a scrubber may be applied to reduce the load of HEPA filters. In the scrubber, the aerosol particles are removed by moving from gas to liquid through gas-liquid interface. Since the collection efficiency (CE) depends on gas-liquid interfacial area, fine bubbles are necessary to obtain high collection efficiency. JAEA developed a new particle removal technique by using bubble breakup phenomenon in a Venturi tube. To confirm usefulness of the technique, we performed the CE measurements and observed gas-liquid two-phase flow in the Venturi tube. In comparison with a straight pipe type, the Venturi type can have removed particles more 1,000 than it. The CE is almost the same as a HEPA filter. In addition, the Venturi type has the enough CE as the pretreatment equipment for various materials of particles such as Kanto loam, SUS and oil. Besides, we clarified that the CE of the Venturi type depended on the gas and liquid flow rates. The CE increases with the increase of the liquid flow rate but decreases with the increase of the gas flow rate. This is because the CE is affected by the bubble breakup phenomenon in the Venturi tube. In the experiment, we confirmed that cavitation number which is the parameter of the bubble breakup was related to the CE of the Venturi type.
Fukaya, Yuji; Goto, Minoru; Ohashi, Hirofumi
Annals of Nuclear Energy, 181, p.109534_1 - 109534_10, 2023/02
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)Feasibility of reprocessing of High Temperature Gas-cooled Reactor (HTGR) spent fuel by existing Plutonium Uranium Redox EXtraction (PUREX) plant and technology has been investigated. The spent fuel dissolved solution includes approximately 3 times amount of uranium-235 and 1.5 times amount of protonium because of the 3 times higher burnup compared with that of Light Water Reactor (LWR). Then, the heavy metal of the spent fuel is planned to be diluted to 3.1 times by depleted uranium to satisfy the limitation of Rokkasho Reprocessing Plant (RRP) plant. In the present study, recoverability of uranium and plutonium with the dilution is confirmed by a simulation with a reprocessing process calculation code. Moreover, the case without the dilution from the economic perspective is investigated. As a result, the feasibility is confirmed without the dilution, and it is expected that the reprocessed amount is reduced to 1/3 compared with a diluted case even though the facility should be optimized from the perspective of mass flow and criticality.
Zheng, X.*; Kato, Masaru*; Uemura, Yohei*; Matsumura, Daiju; Yagi, Ichizo*; Takahashi, Kiyonori*; Noro, Shinichiro*; Nakamura, Takayoshi*
Inorganic Chemistry, 62(3), p.1257 - 1263, 2023/01
Times Cited Count：1 Percentile：58.61(Chemistry, Inorganic & Nuclear)Fukaya, Yuji; Okita, Shoichiro; Sasaki, Koei; Ueta, Shohei; Goto, Minoru; Ohashi, Hirofumi; Yan, X.
Nuclear Engineering and Design, 399, p.112033_1 - 112033_9, 2022/12
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)Kernel migration of TRi-structural ISOtropic (TRISO) fuel for High Temperature Gas-cooled Reactor (HTGR) has been analyzed to investigate the potential dominating effects. Kernel migration is a major fuel failure mode and dominant to determine the lifetime of the fuel for High Temperature engineering Test Reactor (HTTR). However, this study shows that the result and reliability depend on the evaluation method. The evaluation method used in this study takes into account of actual distribution of Coated Fuel Particles (CFPs) and the resulting heterogeneous fuel temperature calculation with such distribution. The result shows that the Kernel Migration Rate (KMR) is predicted to be about 10% less compared with the most conservative evaluation.
Banno, Masaki*; Funatani, Shumpei*; Takamatsu, Kuniyoshi
Yamanashi Koenkai 2022 Koen Rombunshu (CD-ROM), 6 Pages, 2022/10
A fundamental study on the safety of a passive cooling system for the reactor pressure vessel (RPV) with radiative cooling is conducted. The object of this study is to demonstrate that passive RPV cooling system with radiative cooling is extremely safe and reliable even in the event of natural disasters. Therefore, an experimental apparatus, which is about 1/20 scale of the actual cooling system, was fabricated with several stainless steel containers. The surface of the heating element in the experimental apparatus simulates the surface of the RPV, and the heating element generates natural convection and radiation. As a result of the experiments, we succeeded in visualizing the natural convection in the experimental apparatus in detail.
Aoki, Takeshi; Shimizu, Atsushi; Iigaki, Kazuhiko; Okita, Shoichiro; Hasegawa, Takeshi; Mizuta, Naoki; Sato, Hiroyuki; Sakaba, Nariaki
JAEA-Review 2022-016, 193 Pages, 2022/08
JAEA-Review-2022-016.pdf:42.06MB
Aiming to realize a massive, cost-effective and carbon-free hydrogen production technology utilizing a high temperature gas cooled reactor (HTGR), Japan Atomic Energy Agency (JAEA) is planning a HTTR heat application test producing hydrogen with High Temperature Engineering Test Reactor (HTTR) achieved 950
C of the highest reactor outlet coolant temperature in the world. In the HTTR heat application test, it is required to establish its safety design realizing highly safe connection of a HTGR and a hydrogen production plant by the Nuclear Regulation Authority to obtain the permission of changes to reactor installation. However, installation of a system connecting the hydrogen production plant and a nuclear reactor, and its safety design has not been conducted so far in conventional nuclear power plant including HTTR in the world. A special committee on the HTTR heat application test, established under the HTGR Research and Development Center, considered a safety design philosophy for the HTTR heat application test based on an authorized safety design of HTTR in terms of conformity to the New Regulatory Requirements taking into account new considerable events as a result of the plant modification and connection of the hydrogen production plant. This report provides materials of the special committee such as technical reports, comments provided from committee members, response from JAEA for the comments and minutes of the committee.
Aihara, Jun; Kuroda, Masatoshi*; Tachibana, Yukio
Mechanical Engineering Journal (Internet), 9(4), p.21-00424_1 - 21-00424_13, 2022/08
It is important to improve oxidation resistance of fuel for huge oxygen ingress into core to improve safety of high temperature gas-cooled reactors (HTGRs), because almost volume of cores of HTGRs consist of graphite. In this study, simulated oxidation resistant fuel elements, of which matrix is mixture of SiC and graphite, has been fabricated by hot press method. In order to maintain structural integrity of fuel element under accident conditions, high-strength fuel elements should be developed. In order to identify optimal hot press conditions for preparing high-strength fuel elements, effect of hot press conditions on mechanical strength properties of fuel elements should be evaluated quantitatively. In the present study, response surface model, which represents relationship between hot press conditions and mechanical strength properties, has been constructed by introducing statistical design of experiments (DOE) approaches, and optimal hot press conditions were estimated by model.
Aoki, Takeshi; Shimizu, Atsushi; Iigaki, Kazuhiko; Okita, Shoichiro; Hasegawa, Takeshi; Mizuta, Naoki; Sato, Hiroyuki; Sakaba, Nariaki
JAEA-Technology 2022-011, 60 Pages, 2022/07
JAEA-Technology-2022-011.pdf:2.08MB
Japan Atomic Energy Agency is planning a High Temperature Engineering Test Reactor (HTTR) heat application test producing hydrogen with the HTTR which achieved the highest reactor outlet coolant temperature of 950C in the world to realize a massive, cost-effective and carbon-free hydrogen production technology utilizing a high temperature gas cooled reactor (HTGR). In the HTTR heat application test, it is required to establish its safety design for coupling a hydrogen production plant to HTGR through the licensing by the Nuclear Regulation Authority (NRA). A draft of a safety design philosophy for the HTTR heat application test facility was considered taking into account postulated events due to the plant modification and coupling of the hydrogen production plant based on the HTTR safety design which was authorized through the safety review of the NRA against New Regulatory Requirements. The safety design philosophy was examined to apply proven conventional chemical plant standards to the hydrogen production plant for ensuring public safety against disasters caused by high pressure gases. This report presents a result of a consideration on safety design philosophies regarding the reasonability and condition to apply the High Pressure Gas Safety Act for the hydrogen production plant, safety classifications, seismic design classification, identification of important safety system.
